Starship Troopers Reference Collection.
S.F.3.D Original
Ma.K. ZbV3000 Maschinen Krieger
Kraftsprunganzug©
(My original Ma.K. designs, based on the 1/6-scale SAFS.)
I had to build up the tops of the legs to make them "squared". I used beads of hot-glue around the edge. Every now and then, I would dribble some on the inside to secure the wall I was building. Once flat across, they can be glued down to the bottom of the molding container. In this case, two large cups from the movie theatre.
Here are all of the remaining parts to be cast. Absent are the upper right and lower left arm sections. My design does not require them.
Here they are again just after the silicon was poured. The bucket with the stick in it, is the gallon-kit, mixed in it's own container (...they leave enough room at the top to do this... nice of them, eh?). To the right you can see some of the parts after being de-molded.
Four torsos awaiting limbs.
Free counters provided by Andale.
Copyright © 1998~2003 David Ramsay, All rights reserved.
"Kraftsprunganzug" designs and concepts Copyright © 2001~2003 David Ramsay.
All other trademarks and copyrights are the property of their respective owners.
All rights reserved.
No infringement is intended or desired.
No images may be captured, copied, reproduced or used without permission.
All images and information contained herein are Copyright their respective owners.
The contents of these pages, is Copyrighted by TrooperPX, as an artistic expression.
This is fan web-site and is intended solely to promote everything Starship Troopers.
S.F.3.D Original © Copyright 1982~1985 Hobby Japan/Kow Yokoyama
Ma.K., ZbV3000 Maschinen Krieger, © Copyright 1998~2003 Kow Yokoyama